|
Industrial process imaging, or industrial process tomography or process tomography are methods used to form an image of a cross section of vessel or pipe in a chemical engineering or mineral processing, or petroleum extraction or refining plant.〔 McCann, H and Scott, D.M (eds) Process Imaging for Automatic Control, Taylor and Francis, 2005, ISBN 0-8247-5920-6〕 〔 MS Beck and R Williams, Process Tomography: Principles, Techniques and Applications, Butterworth-Heinemann (July 19, 1995),ISBN 0-7506-0744-0 〕 Process imaging is used for the development of process equipment such as filters, separators and conveyor, as well as monitoring of production plant including flow rate measurement. As well as conventional tomographic methods widely used in medicine such as X-ray computed tomography, magnetic resonance imaging and gamma ray tomography, and ultra-sound tomography, new and emerging methods such as electrical capacitance tomography and magnetic induction tomography and electrical resistivity tomography (similar to medical electrical impedance tomography) are also used. Although such techniques are not in widespread deployment in industrial plant there is an active research community, including a Virtual Center for industrial Process Tomography,〔Virtual centre for Industrial Process Tomography, (www.vciptorg.uk ), Aceessed 06/10/2006〕 and a regular World Congress on Industrial Process Tomography, now organized by a learned society for this area, the ''International Society for Industrial Process Tomography''〔(【引用サイトリンク】url=http://www.isipt.org/ )〕 A number of applications of tomography of process equipment were described in the 1970s, using Ionising Radiation from X-ray or isotope sources but routine use was limited by high cost involved and safety constraints. Radiation-based methods used long exposure times which meant that dynamic measurements of the real time behaviour of process systems were not feasible. The use of electrical methods to image industrial processes was pioneered by Maurice Beck at the University of Manchester Institute of Science and Technology in the mid 1980s〔 Roger Waterfall, Maurice Sidney Beck M Inst P (1929-1999), November 1999, (). 〕 ==References== 〔 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Industrial process imaging」の詳細全文を読む スポンサード リンク
|